eShop
  1. Böllhoff Germany
  2. Products
  3. Assembly technology
  4. RIVKLE® blind rivet nuts and blind rivet studs

Riveting

RIVKLE®

Processing systems for blind rivet nuts and studs

RIVKLE® B2007 – Cordless setting tool for processing RIVKLE® blind rivet nuts and studs (M 3 to M 10)

Manual and automated processing tools

Create threads in thin-walled components

RIVKLE® blind rivet nuts and studs are versatile solutions for fastening a load-bearing nut or bolt thread to thin-walled components where cut threads are not an option due to insufficient wall thickness. To ensure optimal processing, we offer a wide range of tools – from manual to automated.

Method and principle

RIVKLE® processing technology

Setting process using the example of the spindle stroke method

Here the RIVKLE® blind rivet nut or stud is spun on, compressed and then spun off.

Your advantage: a faster and easier process.

RIVKLE® blind rivet nuts The riveting process

Stroke-controlled riveting

The product tables in our RIVKLE® catalogues are guidelines for adjusting the setting stroke S that should be used with a particular RIVKLE® blind rivet nut or stud for optimal riveting.

Your advantage: A faster and easier process.

 

Pressure-controlled riveting

With the stroke-controlled method, the riveting tool generates maximum riveting pressure over the entire operating range. In some cases this results in blind rivet nuts and studs being fastened too tightly or too loosely, due to different component thicknesses.

This phenomenon is prevented with the pressure-controlled method, since the riveting pressure is generated and controlled independently of workpiece thickness.

Your advantages: optimized riveting in workpieces of different thicknesses and repeated setting of a RIVKLE® element is possible. With pressure-controlled riveting, service life of the mandrels increases.

Any questions?

We are here to assist you

Do you want to know more about our products or services? Our team will be happy to advise you.

Contact us

Find the right solution for your application

Manual hand-operated installation tools for RIVKLE®

  • RIVKLE® OPTEX

    Creation of hexagonal sockets from round drill holes and setting of RIVKLE® blind rivet nuts.

    Use

    • Individual mounting

    Technical data

    • Max. setting stroke: 7 mm
    • Stampable component thickness: 0.5 to max. 2.5 mm steel and aluminium sheets
    • Weight: 2.1 kg
    RIVKLE® OPTEX in our eShop
  • RIVKLE® M2007

    Mode of operation

    Spin on and spin off through ratchet function

    Use

    • For low quantities and for repairs

    Technical data

    • Capacity: up to 2 units/minute
    • Weight: 1.2 kg
    RIVKLE® M2007 in our eShop
  • RIVKLE® BRK 01

    Mode of operation

    Rivet spin-on and spin-off via knurled nut. Compression by lever action of the hand-operated tool.

    Use

    • Individual mounting

    Technical data

    • Capacity: up to 4 units/minute
    • Weight: 0.6 kg
    RIVKLE® BRK 01 in our eShop
  • RIVKLE® BRK 10

    Mode of operation

    Rivet spin-on and spin-off with drill spindle. Riveting by optimal lever action. Practical fast stroke adjustment.

    Use

    • Small-scale production

    Technical data

    • Capacity: up to 5 units/minute
    • Weight: 1.9 kg
    RIVKLE® BRK 10 in our eShop
  • RIVKLE® ES 51

    Mode of operation

    Rivet spin-on and spin-off with crank. Compression by gentle lever action supported by the integrated hydraulic pump.

    Use

    • Individual mounting

    Technical data

    • Capacity: up to 4 units/minute
    • Weight: 2.7 kg
    RIVKLE® ES 51 in our eShop

Interested?

Order manual hand-operated installation tools for RIVKLE® online now

In the eShop, you will find the latest information on price and availability, technical data sheets and CAD downloads, as well as our varied range of branded products and standard parts.

Visit eShop

Mechanical installation tools for RIVKLE®

  • RIVKLE® B2007

    Its cordless design makes the RIVKLE® B2007 extremely flexible. Li-ion technology ensures adequate operating time.

    Use

    • Designed for use in challenging industrial environments.

    Technical data

    • Capacity: up to 24 units/minute
    • Max. setting stroke: 7 mm
    • M 3 – M 10 made of steel
    • Max setting pressure: 3,000 N to 22,000 N
    • Weight: 2.49 kg
    RIVKLE® B2007 in our eShop
  • RIVKLE® P1007

    Multi-dimensional hydraulic/pneumatic tool for RIVKLE® blind rivets and studs

    Mode of operation

    • Spin-on blind rivet nuts and studs via touch automation.
    • Rivet with just one actuation switch.
    • Force-monitored installation, colour-coded force setting.

    Use

    • Medium-scale to large-scale production

    Technical data

    • Capacity: up to 15 units/minute
    • Max. setting stroke: 7 mm
    • M 3 - M 6 steel and stainless steel; M 8 aluminium
    • Max. setting pressure: 13,000 N
    • Weight: 1.8 kg
    RIVKLE® P1007 in our eShop
  • RIVKLE® P2007

    Multi-dimensional hydraulic/pneumatic tool for processing RIVKLE® blind rivets and studs

    Mode of operation

    Spin-on blind rivet nuts and studs via touch automation.
    Rivet process with just one actuation switch. Installation pressure monitor. Pressure adjustment through colour coding.

    Use

    • Medium-scale to large-scale production

    Technical data

    • Capacity up to 15 units/minute
    • Max. setting stroke: 7 mm
    • M 4 - M 10 steel; M 5 - M 12 aluminium; M 4 - M 8 stainless steel
    • Max. setting pressure: 21,000 N
    • Weight: 2.2 kg
    RIVKLE® P2007 in our eShop
  • RIVKLE® P3007

    Multi-dimensional hydraulic/pneumatic tool for processing RIVKLE®  blind rivet nuts and studs

    Mode of operation

    Spin-on blind rivet nuts and studs via touch automation – rivet process with just one actuation switch.
    Installation force monitor. Pressure adjustment through colour coding.

    Use

    • Medium-scale to large-scale production

    Technical data

    • Capacity up to 15 units/minute
    • Max. setting stroke: 8 mm
    • M 8 - M 14 steel; M 8 - M 16 aluminium; M 8 - M 12 stainless steel
    • Max. setting pressure: 40,000 N
    • Weight: 3.4 kg
    RIVKLE® P3007 in our eShop
  • RIVKLE® P2005

    Multi-dimensional hydraulic/pneumatic tool for processing RIVKLE® blind rivet nuts and studs. Spin-on blind rivet nuts and studs via touch automation.

    Mode of operation

    Rivet process with just one actuation switch. Stroke adjustments via adjustment ring.

    Use

    • Large-scale production

    Technical data

    • Capacity: up to 15 units/minute
    • Max. setting stroke: 7 mm
    • M 3 - M 12 steel and aluminium; M 3 - M 10 stainless steel
    • Max. setting pressure: 21,000 N at 5.5 – 7.0 bar
    • Weight: 2.6 kg
    RIVKLE® P2005 in our eShop
  • RIVKLE® P2007 PN

    Multi-dimensional hydraulic/pneumatic tool for RIVKLE® PN blind rivet nuts and studs

    Mode of operation

    • Spin-on blind rivet nuts and studs via touch automation – rivet with just one actuation switch.
    • Installation force monitor.
    • Force-monitored installation, colour-coded force setting.

    Use

    • Medium-scale to large-scale production

    Technical data

    • Capacity up to 15 units/minute
    • Max. setting stroke: 14 mm
    • M 4 - M 10 steel
    • Max. setting pressure: 14,500 N
    • Weight: 2.4 kg
    RIVKLE® P2007 PN in our eShop
  • RIVKLE® P3007 PN

    Multi-dimensional hydraulic/pneumatic tool for RIVKLE® PN blind rivet nuts and studs

    Mode of operation

    • Spin-on blind rivet nuts and studs via touch automation – rivet with just one actuation switch.
    • Installation force monitor.
    • Force-monitored installation, colour-coded force setting.

    Use

    • Medium-scale to large-scale production

    Technical data

    • Capacity up to 15 units/minute
    • Max. setting stroke: 14 mm
    • M 8 and M 10 steel and stainless steel
    • Max. setting pressure: 25,000 N
    • Weight: 3.1 kg
    RIVKLE® P3007 PN in our eShop
  • RIVKLE® EP X009

    Suitable for use with our mechanical installation tools RIVKLE® P1007, P2007, P2007 PN, P3007 and P3007 PN.

    Properties

    • Process control through setting path monitoring
    • Detailed error description on 3.5" touch screen
    • LED display on the RIVKLE® EP X009 control unit and setting tool
    RIVKLE® process control in our eShop

Interested?

Order mechanical installation tools for RIVKLE® online now

In the eShop, you will find the latest information on price and availability, technical data sheets and CAD downloads, as well as our varied range of branded products and standard parts.

Visit eShop

Automated setting tools for RIVKLE®

  • RIVKLE® EPK

    Mode of operation

    Pressure-regulated, path-monitored tool for complete quality control of the riveting process, with fault warning signal. RIVKLE® spin-on through touch automation on the spindle, automatic spin-off after riveting.

    Variants

    • RIVKLE® EPK in versions EPK C (M 4 to M 10) or EPK HP  (M 8 to M 14)
    • EPK C either with gun-style or bar-style setting head
    • EPK HP with bar-style setting head  version of the EPK C with increased riveting force.

    Use

    • Large-scale production
    • High quality standards
    • Safety components
    • Documentation requirement
  • RIVKLE® HSA 2.0

    Mode of operation

    This setting head is suitable for automated installation of blind rivet nuts and studs. RIVKLE® blind rivets are fed by means of vibrating spiral conveyors or other distribution systems. Process control is integrated. RIVKLE®  blind rivet nuts and studs with hexagon shank can be easily and directly fed in correctly in all spatial positions, even upside down.

    Technical data

    • Loading time: approx. 2.8 seconds
    • Rivet process: approx. 2 seconds
    • Max. setting stroke: 28 mm
    • Max. setting pressure: 5,000 to 32,000 N
    • Weight: 23 kg

Accessories

  • RIVKLE® FC340

    Suitable for installation tools: RIVKLE® B2007, P1007, P2007, P3007, P2007 PN and P3007 PN.

    Properties

    • Measuring range: 0 to 40 kN
    • Measuring accuracy: ± 3 %
    • Application area: M 3 to M 16

    Advantages

    • Easy operation: one rivet cycle → riveting force display
    • No set-up required
    • Compatible with all force-controlled RIVKLE® installation tools
    RIVKLE® FC340 in our eShop

We are happy to help

Do you have any questions or a current project?

Let us know – we will get in touch with you

Contact us