Downloads
Operating instruction manuals
Are you looking for an operating instruction manual for your blind rivet nut setting tool. Please find your free download here.
- RIVKLE® P3007 and RIVKLE® P3007 PNpdf4 MBde, en, es, fr, it, pt
- RIVKLE® P1007, P2007 PN, P3007, P3007 PN, P1009, P2009 PN, P3009, P3009 PNpdf52 KBde, en, es, fr, it, pt
- RIVKLE® P1007, RIVKLE® P2007, RIVKLE® P2007 PNpdf3 MBde, en, es, fr, it, pt
- Load indicator for RIVKLE® setting toolspdf759 KBde, en, es, fr, it, pt
- RIVKLE® B2007pdf10 MBde, en, es, fr, it, pt
- RIVKLE® NEO P107pdf4 MBde, en, es, fr, it, pt
- Repair and maintenance conditionspdf107 KBen
Maintenance videos
You are not sure, how to maintain your blind rivet nut setting tool? Quick and easy – we are happy to provide you a short video guideline.
FAQ
Do you need further support?
Welcome to our FAQ section. Here you can find answers to the most common situations you may face in practice.
FAQ – Setting methods
Do not open the RIVKLE® setting tool and contact our maintenance service.
Phone: +49 800 1146580
RIVKLE® blind rivet nuts are developed to meet the mechanical requirements of strength class 8.8.
In our video, we explain where you can find the right setting force.
Force controller FC340for RIVKLE® setting tools You can easily set the stroke by yourself. You can find a detailed explanation in the following video.
RIVKLE® P2005Stroke adjustment The recommended pressure is 5 to 7 bar.
The B2007 should be set to the "load measurement" mode.
The P2005 is a stroke setting device. Measuring the load is not relevant.
We strongly advise not to. It could twist the component and alter its mechanical features. Some setting tools will go on default since the stroke limit is reached before the load (B2007).
We strongly advises not to.
FAQ – Mandrels and anvils
This video shows you how to adjust the anvil before installing RIVKLE® blind rivet studs.
RIVKLE®Anvil mounting for blind rivet studs Either the RIVKLE® is to long and requires a special anvil. Or it is a special extended anvil, please contact us.
You can find a tutorial on how to set the fork on a RIVKLE® B2007 setting tool in the following video.
RIVKLE® B2007Fork adjustment No, a RIVKLE® setting tool with left-hand rotation should be used.
Yes, provided that adequate tools are used.
Yes.
We recommend a conventional grease.
FAQ – Mandrels life time
Böllhoff mandrels are designed with high-strength steel (Rm > 1,600 N/mm2 or Mpa) allowing to support the high RIVKLE® setting force. However, in case of RIVKLE® traction setting, the user has to regularly replace the mandrel of its setting tool. Indeed, the frequency of use of the setting tool can generate a fatigue phenomenon and then the mandrel breaking. Wear of the mandrel thread can also be observed. It is the erosion of the mandrel thread due to successive screwing/unscrewing friction.This phenomenon is influenced by the blind rivet nut friction coefficient.
You can find a tutorial in our video.
RIVKLE® P2007Standard screw adaptation kit How to identify this phenomenon:
- Visual aspect «white» (loss of surface treatment)
- Difficulties to screw and/or unscrew
- Increased number of error messages during automatic operation
The mandrel should be replaced, either when the mandrel is broken or when there is wear on the mandrel thread.
Replace your mandrel with a new one and try again.
Class 12.9 DIN 912 screws should be used.
FAQ – Compressed air system
It is strongly advisable to use a maintenance unit to ensure a constant operating pressure. That will increase the life span of your RIVKLE® setting tool.
Yes, very slightly.
RIVKLE® P1007/P2007/P2007PN/P2005 setting tools consume 8 liters of air per cycle. RIVKLE® P3007/P3007PN consume 15 liters of air per cycle.
FAQ – Oil life cycle
In our video, we have simply explained how to re-fill the hydraulic oil in a RIVKLE® setting tool.
RIVKLE® P2007Oil purge and level adjustment Mineral hydraulic oil VG68 (Viscosity Grade) is adapted to all RIVKLE® setting tools, to the exclusion of RIVKLE® B2007 which operates with mineral hydraulic oil VG10.
The hydraulic oil should be immediately beneath the bleeder screw.
RIVKLE® P2007Oil purge and level adjustment The hydraulic oil should be changed at each level 3 maintenance, or 250,000 cycles for pneumatic and electric RIVKLE® setting tools.
FAQ – Guarantee
The RIVKLE® setting tool is covered by a 12-month guarantee as from shipping date from Böllhoff.
These are wear parts that are not covered by the 12-month guarantee.
The guarantee no longer applies.
Personal support
Didn't find the right answer?
Our team is happy to support you.
Contact us