Search
Country and language
Choose country:
Choose language:
Apply
  1. Böllhoff Canada
  2. Services
  3. Technical Forum – Operating instructions
  4. RIVKLE® NEO P107 - hydraulic/pneumatic setting tool

Technical information

RIVKLE® NEO P107 hydraulic/pneumatic setting tool

We provide you all relevant information and assistance to our hydraulic/pneumatic setting tool for RIVKLE® blind rivet nuts and studs.

RIVKLE® NEO P107

Downloads

Operating instruction manuals

Are you looking for an operating instruction manual for your blind rivet nut setting tool? Please find your free download here.

Maintenance videos

You are not sure, how to maintain your setting tool? Quick and easy – we are happy to provide you a short video guideline.

    RIVKLE® Setting tools

    Are you looking for information relating to another blind rivet nut setting tool?

    Here you can find the operating instruction manuals and maintenance videos for our proven RIVKLE®  setting tools for blind rivet nuts and studs.

    RIVKLE® Setting tools

    FAQ

    Do you need further support?

    Welcome to our FAQ section. Here you can find answers to the most common situations you may face in practice.
    • The push-pull adjustment bush is unsettled.

      Please adjust the push-pull adjustment bush.

    • These problems can cause:

      1) The traction bush is unscrewed, worn and or damaged.

      Please check the traction bush, make sure that it's securely screwed against the push-pull adjustment bush and that the o-ring on the push-pull adjustment bush is indeed present and in good condition, and check for any internal wear on the traction bush.

      2) Unsettled push-pull adjustment

      Please adjust the push-pull adjustment bush.

      3) The tool is not powered with compressed air

      Please check if the tool is correctly supplied with compressed air

    • Please check these three scenarios:

      1) The mandrel thread is worn or damaged

      Please change the mandrel. It is important to replace the mandrel frequently.

      2) Anvil poorly adjusted

      Please check and adjust the position of the anvil

      3) The blind rivet nut isn't held in the setting axis during screwing

      Please hold the blind rivet nut in the setting axis during screwing. To assist if required, engage the first thread of the blind rivet nut on the mandrel by hand.

    • Please check these four scenarios:

      1) Lack of oil in the tool

      Please refill the oil by using the filling bottle supplied

      2) The setting force is insufficient

      Please check if the setting force is correct. We recommend to check it frequently. You can find the right setting force in our RIVKLE® catalogue on page 8.

      3) Insufficient compressed air pressure

      Please check the service pressure.

      4) Application thickness incompatible with the choosen RIVKLE® blind rivet nut

      Please check that the thickness of your application is compatible with the choosen blind rivet nut.

    • These could be the reasons:

      1) Lack of oil in the tool

      Please refill the oil by using the filling bottle supplied

      2) Insufficient compressed air pressure

      Please check the service pressure.

      3) The blind rivet nut isn’t compatible with the tool’s maximum stroke

      Please check that your RIVKLE® NEO P107 tool is compatible with the choosen blind rivet nut

    • Please check these points:

      1) Insufficient compressed air pressure

      Please check the service pressure.

      2) Lack of oil in the tool

      Please refill the oil by using the filling bottle supplied.

      3) Broken pneumatic motor

      Please disconnect the compressed air supply, then check the motor by turning the mandrel.

      4) The setting force is too high

      Please check if the setting force is correct. We recommend to check it frequently. You can find the right setting force in our RIVKLE® catalogue on page 8.
       

    • Please check the following points:

      1) The setting force is too high

      Please check if the setting force is correct. We recommend to check it frequently. You can find the right setting force in our RIVKLE® catalogue on page 8.

      2) Blind rivet nut tapping or mandrel thread damaged

      Please change the mandrel. We recommend to replace the mandrel frequently.

      3) Insufficient compressed air pressure

      Please check the service pressure.

    Personal support

    Didn't find the right answer?

    Our team is happy to support you.

    Contact us