TEPRO^®

Bar closures

Bar closures are used, for example, for stowage boxes for trays, first-aid kits and triangular safety reflectors.

The TEPRO^® turn bar system is installed in the boot on the flap of the side stowage box. It consists of a knob, a bar, a detent washer and a housing made completely of plastic.

Benefits

• Opens and closes quickly
• Design part with high surface quality
• Design part for special color requirements

Load floor handle

The flush-mount handle is easy to open by applying light pressure and reaching under the handle. When the handle is lifted, a lock is released so the load floor can be pulled up. After the handle is actuated, it returns automatically to the flush position and locks the load floor to prevent accidental opening.

Benefits

• No noise emission due to spring preload
• Closed surface
• Locked load floor

Function knob

The function knob consists of two parts: a basic element and a functional element. The basic element is the carrier and is used at various locations in the vehicle. The functional element can be manufactured to have different functions.

Depending on the desired requirement, in this case a bag holder, the appropriate element is installed. When overloaded the hook overstretches without being damaged.
 

Benefits

• Simplified installation
• Reduced number of parts in receiving component
• Optimized bag hook function

Assembly lock

The assembly lock is made up of seven individual parts and serves to set the manual transmission in cars. It is installed in a die-cast aluminum housing through press fitting and it fits tightly with no need for additional locking.

Thanks to the parts geometry and the use of an O-ring, tightness against oil is provided. The entire assembly is monitored via video to check for usability during automatic assembly of the seven components.

Benefits

• 100% tight fit
• Adjustable
• Oil-tight

One-piece thrust washer

This product is installed in the differential gears as a sliding friction disc.

The washer is installed as an interconnection between the wall, the differential gears and the bevel gears for good sliding friction behavior. The requirements for the product result from the high reproducibility caused by the rod gauges for the four bore holes relating to the length of the part.

Benefits

• Resistance to temperature and oil
• Increased surface pressure
• Sliding friction properties
• Rib as anti-rotation device

Window stop

The specially developed window stop absorbs noise when the window is stopped. The window stop is fastened to the glass plates of the side doors by way of a self-tapping TEPRO^® K' in K' screw.

Rough tolerances of the glass drill hole can be compensated by the circumferential fins on the window stop. The taper recess on the K' in K' screw results in a clearance-free fit. This is possible due to the press fit in the cone of the window stop. In addition, the K' in K' screw has a reverse lock.

Benefits

• Resists shear forces of 600 N
• Reduced costs due to full-plastic design
• Noise insulation
• Reverse lock
   

Function

The K' in K' system features special thread profiles. The various system variants are self-locking, self-forming, adjustable and able to provide tolerance compensation.

Note

For more detailed information about our TEPRO^® K' in K' range just click on product page.