Special fasteners

Blind rivet nuts and studs are the most versatile solution for fastening high-strength nut or bolt threads to components when tapped threads are not possible due to small wall thicknesses.

The setting of RIVKLE® blind rivet nuts is often the only fastener solution for hollow sections, housings or where access is limited to one side of a component for adding a thread to thin-walled workpiece.

For years, RIVQUICK® blind rivet technology has proven to be a reliable method for non-detachable joining of thin-walled components.

RIVSET® self-pierce riveting is a process for high-strength mechanical joining of similar materials or material combinations. In this process several layers can be joined easily.

The innovative joining technology with the fully automatic system for stored feeding is suitable for plenty of material combinations.

IMTEC® refers to the „In-Moulding TEChnology“ and describes the in-moulding of metal thread inserts with plastics before ejection.

Quick and process-safe adhesion

The ONSERT® technology allows adhesion of different fasteners to diverse materials.

Screwing solutions made of plastic for plastics

The K' in K' system was especially developed by us and is characterised by special thread profiles. The different system variants are self-locking, self-tapping, self-forming, adjustable and tolerance-compensating.

Blind rivet nuts and studs are the most versatile solution for fastening high-strength nut or bolt threads to components when tapped threads are not possible due to small wall thicknesses.

The setting of RIVKLE® blind rivet nuts is often the only fastener solution for hollow sections, housings or where access is limited to one side of a component for adding a thread to thin-walled workpiece.

Highly wear-resistant thread inserts for plastic parts

AMTEC® stands for "After Moulding TEChnology" and refers to the installation of brass thread inserts into plastic components after moulding.

For high-strength fastenings

HELICOIL® thread inserts create high-strength fastenings in metallic low-strength materials and have been well established on the market for about 50 years.

Thread repair is worth it with HELICOIL® plus

HELICOIL® plus repair range kits allow easy installation of a new thread in only a few steps.

Thread reinforcement in metals

KOBSERT® threaded bushes are the ideal solution for creating highly wear-resistant, vibration-resistant and torsion-proof nut threads in metal low-strength materials.

Special nuts with screw lock

HELICOIL® locknuts are a combination of high-strength nut bodies and HELICOIL® thread inserts.

Sealing of bolt-nut joints

SEAL LOCK® sealing nuts are an economical solution for reliable sealing against gaseous and liquid media under high pressure.

Vibration and noise-decoupling fastening system

The two-component SNAPLOC® fastening system consists of a ball stud and a coupling for fast installation and is based on a simple snap connection.

Vibration and noise-decoupling fastening element

RIVKLE® Elastic is a detachable blind rivet joint with vibration and noise-decoupling function.

FLEXITOL® tolerance compensation systems have been designed to compensate tolerances by economical installation solutions and thus to ensure a secure process in series productions.

QUICKLOC clamp, rotation and pressure locks are especially suitable for repeatedly detachable joints and quick assemblies.

TEPRO® technical moulded parts and components

We offer system components individually adapted to application requirements. Our service includes application engineering, market-oriented development of concepts in almost no time, prototype design and tool manufacturing, as well as the production of parts that are ready for series production.

We design special parts and parts as per drawings for you. Taking into account material requirements, production methods and surface condition, we offer the best solution for your application.